Composite, Male 90° Connector, Air Brake Push-to-Connect, 3/8 in. x 1/4 in.
Technical Specifications
Product Description
Typical Applications:
Parker
• Air brakes, instrumentation, air controls, air bags, and air seats.
• Exceeds DOT pressure requirements for air brake systems.
• For use with SAE J844 type A or B air brake tubing.
• It is recommended to applied thread sealant to all pipe threads.
• Quick Disconnect - Simply push tubing In, no tools or loose parts to handle in tight places.
• Body can be rotated after assembly for proper orientation.
• Pipe threads are the most common fitting style used in the United States and Canada.
• Crosses References: Parker VS369PTCR-6-2, Parker 369PTC-6-2, Tramec Sloan S769PMT-6-2, Phillips 12-94024, Grainger 48MA13
| Assembly | Disassembly |
 |  |
| Insert tube end into fitting, sliding I.D. of the tube over insert (friction is felt as tube slides past O-Ring). Continue to push tube in until it bottoms out. | Use thumb and forefinger to disconnect tube. Hold down the top of the insert against the fitting body and pull out the tubing with the other hand. No tools needed. |
Compliance & Restrictions
| Name | Item | Description | |
|---|---|---|---|
 | Phillips | 12-94024 | MALE ELBOW 1/8 X 1/4 |
 | UNSPSC CODES | 27131600 | Air fittings and connectors |
 | VMRS (ATA) CODES | 053-008-004 | MALE ELBOW 1/8 X 1/4 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here