Share
Print
APPROVED SUPPLIER
3/8 Permalign
Hover over image to magnify
Technical Specifications
Body Material
Brass
Package Quantity
10
Brand
APPROVED SUPPLIER
Shipping Weight
0.23 lb.
DOT Approved
No
System of Measurement
Fractional
Fitting Type
Captured Sleeve Compression Fitting
Temperature Range (Deg. F)
-65 to +250 deg. F
Item
Nut with Captive Sleeve
Tube Outside Diameter
3/8 in.
Mfr. Part Number
91104
Working Pressure
Up to 3,000 psi
Product Description
Compression Fitting Nut With Sleeve
- Reduce Your Labor Costs! Installation Time Is Cut By 40% Over Standard Compression Fittings, And 70% Over SAE 45° Flare Fittings.
- Use Them On Copper , Aluminum, And Thermoplastic Tubing.
- Fittings Eliminate "Sleeve Cocking" And Leakage, Creating A More Reliable Connection.
- The Pressure Rating Is Five To Six Times That Of Most Standard Compression Fittings.
- They Cover More Than 70% Of All Fitting Requirements (Maximum Working Pressure = 3,000 Psi).
- Tube Outside Diameter: 3/8
- Cross Reference: 961A-6 Easy To Install Simply Insert The Tube Until It Bottoms On The Shoulder Of The Fitting. Tighten By Hand. Complete The Seal With One Turn Of The Wrench And Your Connection Is Complete!
Compliance & Restrictions
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Barcode
Pmalign Nut 3/8
| Name | Item | Description | |
|---|---|---|---|
 | WEATHERHEAD | 961A-6 | PMALIGN NUT 3/8 |
 | UNSPSC CODES | 40173301 | PMALIGN NUT 3/8 |
 | VMRS (ATA) CODES | 053-007-004 | PMALIGN NUT 3/8 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here