Share
Print
NORTON
Norton 4" Crimped Wire Wheel Brush, Carbon Steel, 0.014" Wire Dia., 7/8" Trim Length, 66252839001
Hover over image to magnify
Technical Specifications
Key Specifications
Abrasive Shank Size
No Shank
Mfr. Part Number
66252839001
Arbor Hole
5/8 in.
Mounting Type
Arbor Hole
Brand
NORTON
Package Quantity
1
Brush Diameter
4 in.
Shipping Weight
0.4 lb.
Face Width
7/16 in.
Trim Length
7/8 in.
Fill Material
Carbon Steel
Wire Diameter
0.014 in.
Item
Wire Wheel Brush
Wire Wheel Brush Type
Crimped
Maximum RPM
15000 RPM
General
For Use With
Right Angle Grinders, Vertical Shaft Portable Grinders
Product Description
- Wheel brushes with arbor holes are used on bench and pedestal grinders.
- Their extra flexibility and lower impact makes these brushes an excellent choice for cleaning irregular surfaces and finer surface finishing, and light to medium duty surface contaminant removal applications.
- Narrow-faced brushes are ideal for general-purpose brushing of uneven or difficult-to-reach surfaces
Compliance & Restrictions
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Barcode
Crimped Wire Whl Brush 4"
| Name | Item | Description | |
|---|---|---|---|
 | UNSPSC CODES | 27111907 | |
 | VMRS (ATA) CODES | 053-010-001 | CRIMP WIRE W HL BRUSH 4" |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here