Share
Print
PFERD
Pferd 6" Crimped Wire Wheel Brush, Carbon Steel, 0.0118" Wire Dia., 1-1/8" Trim Length
Hover over image to magnify
Technical Specifications
Key Specifications
Abrasive Shank Size
No Shank
Mfr. Part Number
80042
Arbor Hole
5/8 in.
Mounting Type
Arbor Hole
Brand
PFERD
Package Quantity
1
Brush Diameter
6 in.
Shipping Weight
0.72 lb.
Face Width
5/8 in.
Trim Length
1-1/8 in.
Fill Material
Carbon Steel
Wire Diameter
0.014 in.
Item
Wire Wheel Brush
Wire Wheel Brush Type
Crimped
Maximum RPM
8000 RPM
General
Application
Cleaning Rust, Scale, Dirt, Paint, Deburring, Edge Blending, Roughening for Adhesion, Flash Removal of Rubber and Plastic
For Use With
Right Angle Grinders, Straight Grinders, Bench or Pedestal Grinders
Product Description
Wire Wheel Brush (Narrow Face)
- Can Be Used For Cleaning Rust, Scale, And Dirt, Light Deburring, Edge Blending, Roughening For Adhesion, Finishing For Appearance, And Finish Preparation Prior To Painting Or Plating.
- Diameter: 6"
- Standard Arbor Hole: 1/2" Or 5/8"
- Face Width: 5/8"
- Wire Size: .014
- Maximum Rpm: 8,000
- For Use With Right Angle Grinders Or Bench Grinders.
Expertly Selected Product Pairings
Compliance & Restrictions
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Barcode
Wire Wheel 6" Narrow .014 Wire
| Name | Item | Description | |
|---|---|---|---|
 | UNSPSC CODES | 27111907 | WIRE WHEEL 6" NARROW |
 | VMRS (ATA) CODES | 053-010-001 | WIRE WHEEL 6" NARROW |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here