Share
Print
PFERD
Pferd 3" Crimped Wire Wheel Brush, Carbon Steel, 0.013" Wire Dia., 7/8" Trim Length
Hover over image to magnify
Technical Specifications
Abrasive Shank Size
1/4 in.
Mfr. Part Number
82863
Arbor Hole
No Arbor
Mounting Type
Shank
Brand
PFERD
Package Quantity
1
Brush Diameter
3 in.
Shipping Weight
0.23 lb.
Face Width
5/8 in.
Trim Length
7/8 in.
Fill Material
Carbon Steel
Wire Diameter
0.013 in.
Item
Wire Wheel Brush
Wire Wheel Brush Type
Crimped
Maximum RPM
20000 RPM
Product Description
Crimped Bevel Steel Wire Brush Wheel 3"
- Less Aggressive Than Knot Wire Type For Lighter-Duty Applications
- Crimped Wire Is More Flexible And Leaves A Superior Surface Finish
- For Weld Cleaning, Scale, Rust, Paint, Adhesive And Oxidatioin Removal, Cleaning, Light Deburring And Flash Removal, Especially On Fillets, Grooves And Inside Edges
- For Use With Grinders Or Hand Drills
Compliance & Restrictions
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Barcode
Mount Crimp Bevel Wire Brsh 3"
| Name | Item | Description | |
|---|---|---|---|
 | UNSPSC CODES | 27111907 | |
 | VMRS (ATA) CODES | 053-010-001 | CRMP WIRE BR SH 3" MNT/BV |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here