Plews/Edelmann Plug N Patch For Radial And Bias Tire 1/8" Stem Size

Steel Belted Insert Plug

• Small Round Molded Rubber Plug-N-Patch.

• For Auto And Truck Nail Hole Punctures.

• Designed With Molded-In Straight Pins.

• 1/8" Stem Size.

• Note: Use With Cement Part No. 910864-6 Only.

• Inspection Inflate Tire To 20 Pounds, Locate Puncture And Remove Puncturing Object (If Still In Tire). Probe Damaged Area Using Camel "Super Grip" Probe No. 15-225 Or Probe No. 15-212. Dismount Tire And Inspect For Damage Inside. Do Not Repair Cuts Longer Than 7/16".

• Cleaning And Buffing Clean Damaged Area Thoroughly With Camel Liquid Buffer No. 12-092, Covering An Area 1/4" Larger Than The Plug Head. Buff Cleaned Area Thoroughly. Do Not Gouge The Liner Of The Tire. Remove All Buffing Dust From The Damaged Area.

• Cementing Apply A Thin Coat Of Universal Cement To The Buffed Area. Allow Cement To Dry Thoroughly.

• Plug-N-Patch Preparation Remove Backing From Gummed Surface Of Plug-N-Patch Repair And Insert Stem Of Unit Into The Puncture. Pull The Plug-N-Patch Through The Tire With An Even Pull Until The Base Of The Patch Is Seated To The Inner Liner. Beads Must Be Relaxed.

• Stitching Complete Repair By Thoroughly Stitching Patch Head To The Casing From Center To Outer Edges. Allow The Repair To Setup A Few Minutes Before Cutting Off Excess. Mount Tire On Rim. Tire Is Now Ready To Use.