Share
Print
APPROVED SUPPLIER
90 deg. Self-Forming Thread Grease Fitting, 1/4"-28
Hover over image to magnify
Technical Specifications
Angle
90 deg.
Nominal Hole Size
0.236 in.
Brand
APPROVED SUPPLIER
Package Quantity
25
Fitting Thread Style
Self-Forming Thread
Shipping Weight
0.5 lb.
Hex Size
3/8 in.
System of Measurement
Fractional
Item
Grease Fitting
Thread Size
1/4"-28
Mfr. Part Number
72533
Product Description
Standard Self-Forming Thread 90° Grease Fitting
- A Special Hardened Thread Allows The Fitting To Be Screwed Into A Plain Hole (Nominal Hole Size .236").
- If Replacement Is Required For Self-Forming Thread Grease Fittings, Use Standard 1/4-28 Threaded Fittings.
- Hex: 3/8
- Size: 1/4-28 Special Taper Thread
- Use In Heat-Treated Parts Is Not Recommended.
Compliance & Restrictions
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Barcode
Grease Fit 1/4-28 90' Selftap
| Name | Item | Description | |
|---|---|---|---|
 | UNSPSC CODES | 40141736 | GREASE FIT. SELF-TAP 90 |
 | VMRS (ATA) CODES | 053-007-022 | Grease Fitting - General Purpose |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here