Share
Print
APPROVED SUPPLIER
Grade L9 USS Hex Head Cap Screw, 1"-8 x 5-1/2", Zinc; Trivalent Yellow, Medium Carbon Alloy Steel, 10 PK
Hover over image to magnify
Technical Specifications
Key Specifications
Basic Material
Steel
Head Width
1-1/2 in.
Brand
APPROVED SUPPLIER
Item
Cap Screw
Country of Origin
Varies (subject to change)
Length Under Head
5-1/2 in.
Diameter/Thread Size
1"-8
Mfr. Part Number
25310
Fastener Diameter
1 in.
Package Quantity
10
Fastener Material Grade/Class
Grade L9
Shipping Weight
14.92 lb.
Fastener Thread Style
Partially Threaded
System of Measurement
Fractional
Finish
Zinc Yellow
Thread Direction
Right Hand
Head Type
Hex Head
Thread Type
Coarse/ USS/ UNC
General
Material
Medium Carbon Alloy Steel
Meets Standards
USS, DIN 931
Product Description
- 1"-8X5 1/2" Grade 9 Hex Head Cap Screw The Grade 9 Fastening System Consists Of One Bolt, Two Washers, And A Free-Spinning Nut Produced To Exacting Specifications. The System Is Engineered To Provide Reliable Performance For Severe Service Conditions, And It Is Recommended For Joints Subject To Severe Stress And Vibration. Typical Applications Are Found On Equipment Or Vehicles Used In Off-The-Road Work, Construction, Mining, Amusement Parks, And Truck And Plant Maintenance. Proper Installation Ensures That Service Loads Are Borne By Machine Components Rather Than By The Fasteners. The Grade 9 System Must Be Used As A Complete System With No Substitutes Or Alterations Of Components (Including Lubrication). Substituting Or Altering Any Component Or Altering The Assembled Finishes, Can Cause Fastener Or Joint Failure. Application Features: *Coarse Thread.
- Free-Spinning Nuts.
- 180,000 Psi Minimum Tensile Strength With Good Ductility.
- Joint Integrity Assured By: High Clamp Loads, Firm Bearing Surfaces Of Washers.
- Uniform Minimal Torque Effort From Controlled Surface Finishes.
- Corrosion Resistance Of Coating On Plated Surfaces.
- Non-Slip Wrenching With Extra Thick Nuts And Bolt Heads. Design Features: *Heat Treated Alloy Steel Manufactured To Controlled Quality Levels.
- Generous Fillet Assures Head Integrity And Uniform Transfer Of Load Between Head And Shank.
- Radius Root Threads Reduce "V-Notch Effect" And "Necking".
- Through-Hardened, Plated Washers Sustain High Clamp Loads And Reduce Friction During Assembly.
- Free-Spinning Nuts Are Designed To Meet 180,000 Psi Proof Strength Of The Bolt.
Compliance & Restrictions
Lot Tracked Item Details
Documents
Item Barcode
1X5-1/2 USS GR 9 Hi Strength
| Name | Item | Description | |
|---|---|---|---|
 | UNSPSC CODES | 31161501 | |
 | VMRS (ATA) CODES | 053-007-005 | HHCS USS GR9 1X5-1/2 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here