Share
Print
APPROVED SUPPLIER
Rawl Toggle Wall Anchor 1/4" X 3"
Hover over image to magnify
Technical Specifications
Brand
APPROVED SUPPLIER
Screw Length
3 in.
Finish
Zinc Plated
Shipping Weight
3.25 lb.
Item
Toggle Bolt
Thread Length
3 in.
Mfr. Part Number
11239
Thread Size
1/4 in.
Package Quantity
50
Toggle Bolt Style
Rawl Toggle
Screw Diameter
0.25 in.
Product Description
Rawl Toggle 1/4" X 3"
- Toggle Bolt Wall Anchor.
- For Use In Block, Wallboard, Plaster, Hollow Tile, Etc.
- Made Of Zinc Plated Steel.
- Conforms To Astm B-633.
- Includes Wings.
- Size: 1/4" X 3" Installation Procedures Drill The Required Hole Through The Base Material. The Tolerances Of The Drill Bit Used Should Meet The Requirements Of Ansi Standard B94.12. In Denser Materials Such As High-Strength Concrete, Drill The Hole 1/16" Larger. Insert Bolt Through Fixture To Be Fastened, Thread On Wings, Then Fold Wings Completely Back And Insert Through Hole Until Wings Spring Open. Pull Back On Assembly To Hold Wings Inside Wall To Prevent The Wings From Spinning While Tightening Bolt. Turn Bolt With Screwdriver Until Firmly Tightened.
Item Barcode
Rawl Toggle 1/4" X 3"
| Name | Item | Description | |
|---|---|---|---|
 | UNSPSC CODES | 31162101 | RAWL TOGGLE 1/4" X 3" |
 | VMRS (ATA) CODES | 053-007-023 | RAWL TOGGLE 1/4" X 3" |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here